- Угловые петли Sensys W90
- С интегрированным демпфером Silent System, с функцией самозакрывания (Sensys 8639i W90)
- Качество соответствует стандарту EN 15570, уровень 3
- Угол открывания 95°
- Для двери толщиной 15 - 28 мм
- Вариант навески двери вкладная навеска (B 4 мм)
- TH-Карта сверления 52 x 5,5 мм
- Глубина чашки петли 12,8 мм
- Монтаж под прикручивание (TH 52)
- Встроенная регулировка для наложения двери +1 мм / -2 мм
- Встроенная регулировка фуги +3 мм / -2 мм
- Регулировка по высоте с помощью монтажной планки
- сталь в цвете черный обсидиан
Opţiuni montaj ușă
Tipuri de montaj
Linia de găurire
Unitate de ambalare
Cod articol
Добавлено в корзину покупок
Технические подробности
| Construção | Armário de canto 90° (W90) |
| Tipo de porta |
Porta padrão / Porta de madeira Porta emoldurada em alumínio (largura de perfil a partir de 50 mm) Porta emoldurada em madeira (largura do perfil a partir de 50 mm) |
| Características de conforto | com amortecimento integrado |
| Opção de montagem | a trabalhar por dentro |
| Ângulo de abertura | 95 ° |
| Espessura mín. da porta | 15 mm |
| Espessura máx. da porta | 28 mm |
| Tipos de copo | TH 52 |
| Base | 4 mm |
| Diâmetro do corpo | 35 mm |
| Profundidade do copo | 12,8 mm |
| Tipo de montagem | com parafuso |
| Superfície da dobradiça | Aço em preto obsidiano |
| Esquema de furação | TH 52 x 5,5 mm |
| Diâmetro do furo de fixação |
Marcação Pré-furação máx. Ø 2,5 mm |
| Ajuste do cobrimento integrado | +3 mm / -2 mm |
| Ajuste de profundidade integrado | +1 mm / -2 mm |
| Furo de fixação | - |
| Mola | Да |
| Superfície | em Obsidian Black |
| EAN | 4023149145346 |
| Código | 9091748 |
| Emb. | 50 unid. |
Endereço do fabricante
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Alemanha
Contacto: info@hettich.com
Videos
Installation instructions & Processing information
- Adjusting hinge
- Installing hinge
- Hettich Technical Assistant
- Calculating weight / Number of hinges per door
- Installing the hinge cup
- Adjusting mounting plate (oblong hole height adjustment)
- Drilling pattern tolerances
- Adjusting mounting plate (Direct height adjustment)
- Mounting the opening angle stop
Safety instructions
|
|
Follow instructions |
|
|
Keep away from children |
|
|
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings. |
|
|
Attention shipping packaging! Fittings may fall out if opened carelessly. |
|
|
Attention! Only suitable for indoor use and the usual climatic conditions there |
|
|
Caution! Ensure a suitable choice of material. |
|
|
Warning against incorrect assembly due to the use of incorrect tools. |
|
|
Caution! Use adjusting devices with care. Risk of injury due to slipping. |



