- Centre hinge for folding doors
- For door thicknesses from 15 mm
- Same drilling pattern for door and side element, both elements are mounted separately
- The reveal can be infinitely adjusted from minimum reveal to + 4 mm, application is always flush
- Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm (exception: use with WingLine L only permits an adjustment of 3 mm or 6 mm)
- Nickel plated die-cast zinc
| Pivot offset mm | Door offset mm |
| 0 | 0 |
| 3 | 6 |
| 6 | 12 |
| Example for reveal = 3 mm | |
Hettich CAD
Hettich Technical Assistant
Deschideți catalogul răsfoibil (TECHNICĂ ȘI INOVAȚII)Type of installation
PU
Order no.
Adăugat la coșul tău de cumpărături
Detalii tehnice
| Tipuri de montaj | prin presare |
| Opţiuni montaj ușă | aplicată |
| Grosime min. uşă | 15 mm |
| Unghiul de deschidere ° | 180 ° |
| Opţiuni montaj ușă | aplicată |
| Diametrul cupei | 35 mm |
| Unghi deschidere | 180 ° |
| Cupă / braț balama | zincat nichelat |
| EAN | 4023149155086 |
| Cod articol | 1001955 |
| Unitate de ambalare | 100 ea. |
| Componente | Accesorii sistem |
| Design |
confort optimizat standard |
Adresa producătorului
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Germania
Contact: info@hettich.com
Datele CAD
Instructions de montage & informations pour le traitement
Consignes de sécurité
|
Respecter les instructions |
|
Tenir hors de portée des enfants |
|
Attention emballages d'expédition ! Des pièces de ferrure risquent de tomber en cas d’ouverture imprudente. |
|
Attention ! Convient uniquement à l'intérieur et aux conditions climatiques habituelles. |
|
Attention ! Veiller à choisir un matériau approprié. |
|
Avertissement concernant les erreurs de montage dues à l'utilisation d'un outil inapproprié. |