
Suspension hook ø 6 x 50 mm
Wall plug, ø 8 x 40 mm
Set comprises: 1 suspension hooks and 1 wall plugs
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Must be screwed into the wall plug to a depth of at least 40 mm
- Galvanised steel
Wall plug, ø 8 x 40 mm
- For use in solid brick, solid sand lime brick, concrete or engineering brick
- Commercially available purpose-made fixings must be used for other wall materials
- Plastic, white
Set comprises: 1 suspension hooks and 1 wall plugs
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Added to Your Shopping Cart
Technical details
Material |
steel plastic |
Finish | galvanised |
Drilling diameter 01 | 8 mm |
Dimensions | Suspension hooks ø 6 × 60 mm and wall plugs ø 8 x 40 mm |
EAN | 4023149461033 |
Order no. | 46103 |
PU | 100 ea. |