Skip to content Skip to navigation menu
  • Надвижной монтаж с фиксаторами и регулировкой по высоте без инструмента
  • Встроенный демпфер
  • Подходит для ящика с толщиной боковины до 19 мм
  • Концепция единой платформы: идентичные размеры корпуса, ящика и передней панели для направляющих Quadro полного и частичного выдвижения надвижного монтажа
  • Нагрузочная способность соответствует стандарту EN 15338, уровень 3
  • Сталь оцинкованная

Рекомендации:
  • При использовании держателя для фиксации полки в выдвинутом положении длину ящика необходимо уменьшить на 12 мм. (NL) (NL - 12 мм)
Load class
25 kg
Nominal length
550 mm 500 mm 450 mm 400 mm 350 mm 300 mm 250 mm
Mounting side
right left
PU
20 ea.
Order no.
9267401
Technical details
Comprimento de gaveta SKL 300 mm
Capacidade de carga kg 20 kg
Distância entre furos b1 160 mm
Comprimento nominal em 300 mm
Lado de montagem esquerdo
Tipo de guia Corrediça oculta
Tipo de guia Guia oculta
Tipo de extração Corrediça de extracção parcial
Características de conforto Silent System
Classe de carga 25 kg
Tipo de montagem Montagem por deslizamento
Profundidade mínima do corpo KT 313 mm
Largura de montagem (espessura do perfil da gaveta) EB 23 (espessura do perfil da gaveta ≤ 19 mm)
Área de aplicação Gaveta de madeira
Componentes Corrediças de extração
EAN 4023149189043
Código 9267401
Emb. 20 unid.
Endereço do fabricante

Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Alemanha

Contacto: info@hettich.com

Safety instructions
Follow instructions
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings.
Warning against pointed and sharp objects
Not suitable for children under 3 years. Risk of swallowing due to small parts.
Attention shipping packaging! Fittings may fall out if opened carelessly.
Caution! Ensure a suitable choice of material.
Warning against incorrect assembly due to the use of incorrect tools.
Attention! Only suitable for indoor use and the usual climatic conditions there

Loading... Please wait...