Cabinet suspension bracket SAH 15 | 9208645 | eShop Hettich - Your leading manufacturer of furniture fittings

Sari la conținut Treceți la meniul de navigare

Cabinet suspension bracket SAH 15Cod articol 9208645

For screwing on
For rail and hook suspension
Guard to prevent slipping off sideways when suspended from a hook
Load capacity: 30 kg / each in accordance with EN 15939 in test frame A
3-dimensional alignment: height -2 / +9 mm , depth -2 / +18 mm , laterally for hook suspension ± 6 mm / laterally for rail suspension ± 7 mm
Rear panel recess (to front edge of rear panel) at least 15 mm
Lift off height 6 mm
Suitable for use with A type and B type suspension rails
Galvanised steel / white plastic

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Technical Assistant

Deschideți catalogul răsfoibil (TECHNICĂ ȘI INOVAȚII)

25 St.

Bestell-Nr.

9208645

items

Adăugat la coșul tău de cumpărături

Detalii despre produs

Detalii tehnice

Distanța de reglare a adâncimii în (setarea din fabrică a cârligului, măsurată de la spatele corpului până la capătul cârligului)	SAH 15 T16*
EAN	4023149001208
Cod articol	9208645
Unitate de ambalare	25 ea.