SAH 130 pravé | 1066279 | eShop Hettich – váš přední výrobce nábytkového kování

Saltar al contenido Saltar al menú de navegación

SAH 130 derechaNúmero de artículo 1066279

For pressing in
For rail and hook suspension
Guard to prevent slipping off sideways when suspended from a hook
Load capacity 35 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm
Lift off height 7.5 mm
Suitable for use with A type, B type and L typed suspension rails
Galvanised steel / white plastic

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Asistenţă Tehnică

Página de artículo (catálogo desplegable TECHNICĂ ȘI INOVAȚII)

Tabla resumen

Montaj pe partea

stânga și dreapta stânga dreapta

Unitate de ambalare

100 ea.

Cod articol

1066279

Se ha añadido a su cesta de compra

Detalles del producto

Datos técnicos

Capacidad de carga kg	35 kg
Lado de montaje	a la derecha
Medida de ajuste de profundidad (preajuste del gancho, medida trasera de carcasa hasta el extremo de gancho)	19
Ajuste de profundidad integrado	Máx. 15 mm
EAN	4023149364716
Código	1066279
U.E.	100 uds.