- For screwing on
- Rail or hook suspension
- Guard to prevent slipping off sideways when suspended from a hook
- Load capacity: 40 kg / each in accordance with EN 15939 in test frame A
- 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
- Rear panel recess (to front edge of rear panel) at least 16 mm
- Lift off height 7.5 mm
- Suitable for use with B type, A type, L type suspension rails
- Steel nickel plated
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical AssistantMounting side
PU
Order no.
Added to Your Shopping Cart
Technical details
| Belastbarkeit kg | 40 kg |
| Anschlagseite | links und rechts |
| Tiefeneinstellmaß (Voreinstellung des Hakens, Maß Gehäuserueckwand bis Hakenende) | SAH 116,1 T21 |
| Integrierte Tiefenverstellung | 15 mm |
| Rückwandversprung | min. 16 mm |
| Material Gehäuse | Stahl verzinkt |
| EAN | 4023149194764 |
| Bestell-Nr. | 19476 |
| VE | 25 St. |
Adresse des Herstellers
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Deutschland
Kontakt: info@hettich.com
Caractéristiques CAD
Instructions de montage & informations pour le traitement
Consignes de sécurité
|
Respecter les instructions |
|
Utiliser une protection oculaire |
|
Utiliser des protections pour les mains |
|
Interdiction de monter |
|
pas de charge lourde |
|
Avertissement : objet pointu et tranchant |
|
Avertissement : arêtes à risque de coincement et d’écrasement. Ne pas mettre la main dans des portes entrouvertes ou des ouvertures de ferrures. |
|
Avertissement : pièces risquant de tomber en cas de montage inapproprié, d’utilisation excessive ou de mauvaise utilisation. |
|
Ne convient pas aux enfants de moins de 3 ans. Risque d'ingestion dû aux petites pièces. |
|
Attention ! Veiller à choisir un matériau approprié. |
|
Attention ! Utiliser des chevilles et des moyens de fixation adaptés au matériau du mur. |
|
Avertissement concernant les erreurs de montage dues à l'utilisation d'un outil inapproprié. |
|
Attention ! Convient uniquement à l'intérieur et aux conditions climatiques habituelles. |
|
Attention ! Utiliser les dispositifs de réglage avec précaution. Risque de blessures par glissement. |
|
Attention au collage ! En cas de traitement inapproprié, le collage peut se détacher. |
|
|
Attention emballages d'expédition ! Des pièces de ferrure risquent de tomber en cas d’ouverture imprudente. |