- Centre hinge for folding doors
- For door thicknesses from 15 mm
- Same drilling pattern for door and side element, both elements are mounted separately
- The reveal can be infinitely adjusted from minimum reveal to + 4 mm, application is always flush
- Gradual adjustment of the pivot offset with 0 mm, 3 mm and 6 mm (exception: use with WingLine L only permits an adjustment of 3 mm or 6 mm)
- Nickel plated die-cast zinc
| Pivot offset mm | Door offset mm |
| 0 | 0 |
| 3 | 6 |
| 6 | 12 |
| Example for reveal = 3 mm | |
Hettich CAD
Asistente técnico de Hettich (en inglés)
Página de artículo (catálogo desplegable TÉCNICA E INNOVACIONES)
Se ha añadido a su cesta de compra
Datos técnicos
| Tipuri de montaj | prin presare |
| Opţiuni montaj ușă | aplicată |
| Grosime min. uşă | 15 mm |
| Unghiul de deschidere ° | 180 ° |
| Opţiuni montaj ușă | aplicată |
| Diametrul cupei | 35 mm |
| Unghi deschidere | 180 ° |
| Cupă / braț balama | zincat nichelat |
| EAN | 4023149155086 |
| Cod articol | 1001955 |
| Unitate de ambalare | 100 ea. |
| Componente | Accesorii sistem |
| Design |
confort optimizat standard |