|
|
300006208 |
Charnière d’angle Intermat W30, sans fermeture automatique (Intermat 9966 W30), en applique, Angle d'ouverture 95°, TH-schéma de perçage 52 x 5,5 mm, à enfoncer (ø 10 x 11)
|
en applique |
à enfoncer |
TH 52 x 5,5 mm |
50 pce |
9043383 |
|
|
300006212 |
Charnière d’angle Intermat W30, sans fermeture automatique (Intermat 9966 W30), en applique, Angle d'ouverture 95°, TB-schéma de perçage 45 x 9,5 mm, à visser (-)
|
en applique |
à visser |
TB 45 x 9,5 mm |
50 pce |
9043387 |
|
|
300006216 |
Intermat angle hinge W30, without self closing feature (Intermat 9966 W30), overlay, Opening angle 95°, TB-drilling pattern 45 x 9.5 mm, for pressing in (ø 8 x 11)
|
overlay |
for pressing in |
TB 45 x 9,5 mm |
50 ea. |
9043388 |
|
|
300006228 |
Intermat Winkelscharnier W30, ohne Schließautomatik (Intermat 9966 W30), vorliegend, Öffnungswinkel 95°, TH-Bohrbild 52 x 5,5 mm, zum Anschrauben (-)
|
vorliegend |
zum Anschrauben |
TH 52 x 5,5 mm |
50 St. |
9044826 |
|
|
300006256 |
Dobradiça de ângulo Intermat W30, Sem função de fecho automático (Intermat 9966 W30), a trabalhar por dentro, Ângulo de abertura 95°, TB-esquema de furação 45 x 9,5 mm, com parafuso (-)
|
a trabalhar por dentro |
com parafuso |
TB 45 x 9,5 mm |
50 unid. |
9043391 |
|
|
300006260 |
Intermat angle hinge W30, without self closing feature (Intermat 9966 W30), inset, Opening angle 95°, TB-drilling pattern 45 x 9.5 mm, for pressing in (ø 8 x 11)
|
inset |
for pressing in |
TB 45 x 9,5 mm |
50 ea. |
9043392 |
|
|
300006264 |
Intermat angle hinge W30, without self closing feature (Intermat 9966 W30), inset, Opening angle 95°, TB-drilling pattern 45 x 9.5 mm, with expanding sockets (ø 8 x 11)
|
inset |
with expanding sockets |
TB 45 x 9,5 mm |
50 ea. |
9043393 |
|
|
300006268 |
Intermat angle hinge W30, without self closing feature (Intermat 9966 W30), inset, Opening angle 95°, TH-drilling pattern 52 x 5.5 mm, with expanding sockets (ø 10 x 11)
|
inset |
with expanding sockets |
TH 52 x 5,5 mm |
50 ea. |
9043759 |
|
|
300006272 |
Intermat angle hinge W30, without self closing feature (Intermat 9966 W30), inset, Opening angle 95°, TH-drilling pattern 52 x 5.5 mm, for screwing on (-)
|
a trabalhar por dentro |
com parafuso |
TH 52 x 5,5 mm |
50 unid. |
9044829 |
