- For screwing on
- Rail or hook suspension
- Guard to prevent slipping off sideways when suspended from a hook
- Load capacity: 40 kg / each in accordance with EN 15939 in test frame A
- 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
- Rear panel recess (to front edge of rear panel) at least 16 mm
- Lift off height 7.5 mm
- Suitable for use with B type, A type, L type suspension rails
- Steel nickel plated
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical Assistant
Открыть навигатор по каталогу (ТЕХНОЛОГИИ И ИННОВАЦИИ)Mounting side
U.E.
Código
Добавлено в корзину покупок
Технические подробности
| Load capacity kg | 40 kg |
| Mounting side | left and right |
| Depth adjustment distance in (hook's factory setting, measured from enclosure rear to end of hook) | SAH 116.1 T21 |
| Integrated depth adjustment | 15 mm |
| Rear panel recess | 16 mm min. |
| Material, housing | Galvanised steel |
| EAN | 4023149194764 |
| Order no. | 19476 |
| PU | 25 ea. |
Manufacturer's address
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Germany
Contact: info@hettich.com
Datos CAD
Instrucciones de montaje & Informaciones de construcción
Información del catálogo
Instrucciones de seguridad
|
Observar las instrucciones |
|
Utilizar protección ocular |
|
Utilizar protección de manos |
|
Prohibido subirse |
|
Ninguna carga pesada |
|
Advertencia de objeto puntiagudo y afilado |
|
Advertencia de bordes con riesgo de atrapamiento y aplastamiento. No introducir las manos en los huecos de puerta abiertos ni en los huecos de los herrajes. |
|
Advertencia de caída de componentes en caso de montaje incorrecto, sobrecarga o uso indebido. |
|
No apto para niños menores de 3 años. Peligro de atragantamiento por piezas pequeñas. |
|
¡Atención! Elegir el material adecuado. |
|
¡Atención! Utilizar tacos y medios de fijación adecuados para el material de la pared. |
|
Advertencia de montaje incorrecto debido al uso de una herramienta incorrecta. |
|
¡Atención! Solo apto para interiores y las condiciones climáticas habituales en interiores |
|
¡Atención! Utilizar con cuidado los dispositivos de ajuste. Riesgo de lesiones por resbalamiento. |
|
¡Atención! Unión adhesiva. En caso de procesamiento incorrecto, puede soltarse la unión adhesiva y pueden caer piezas del mueble. |
|
|
¡Atención! Embalaje de envío. Si no se abre con cuidado pueden caer los componentes de herraje. |