Skip to content Skip to navigation menu
Suspension hook ø 6 x 50 mm
  • Must be screwed into the wall plug to a depth of at least 40 mm
  • Galvanised steel

Wall plug, ø 8 x 40 mm
  • For use in solid brick, solid sand lime brick, concrete or engineering brick
  • Commercially available purpose-made fixings must be used for other wall materials
  • Plastic, white

Set comprises: 1 suspension hooks and 1 wall plugs
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
  • Both the furniture design and the quality of the furniture's material and production are beyond our control.
  • The quality and condition of wall materials are also beyond our control.
  • The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
  • Commercial type special mounting elements must be used for attachment to other wall materials.
  • Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
  • Mounting suspension rails:
    - with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
    - from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
  • Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
  • The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Technical details
Material Acero
Plástico
Acabado Cincado
Diámetro de taladro 01 8 mm
Dimensiones Ganchos para colgar ø 6 × 60 mm y tacos de mampostería ø 8 x 40 mm
EAN 4023149461033
Código 46103
U.E. 100 uds.
Dirección del fabricante

Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Alemania

Contacto: info@hettich.com

Sicherheitshinweise
Anleitung beachten
Augenschutz benutzen
Handschutz benutzen
Aufsteigen verboten
keine schwere Last
Warnung vor spitzem und scharfem Gegenstand
Warnung vor Klemm- und Quetschkanten. Nicht in offene Türspalten oder Beschlagsöffnungen fassen.
Warnung vor herabfallenden Teilen bei falscher Montage, Überbeanspruchung oder Fehlgebrauch.
Nicht geeignet für Kinder unter 3 Jahren. Verschluckungsgefahr durch Kleinteile.
Achtung! Auf eine geeignete Materialauswahl achten.
Achtung! Für das Wandmaterial geeignete Dübel und Befestigungsmittel verwenden.
Warnung vor Fehlmontage durch Verwendung von falschem Werkzeug.
Achtung! Nur für den Innenraum und dort übliche klimatische Bedingungen geeignet
Achtung! Einstellvorrichtungen vorsichtig verwenden. Verletzungsrisiko durch Abrutschen.
Achtung Klebeverbindung! Bei unsachgemäßer Verarbeitung kann sich die Klebeverbindung lösen und Möbelteile herabfallen.
Achtung Versandverpackungen! Beim unvorsichtigen Öffnen können Beschlagteile herausfallen.

Loading... Please wait...