SAH 216 cabinet suspension bracket | 79717 | eShop Hettich - Your leading manufacturer of furniture fittings

Sari la conținut Treceți la meniul de navigare

SAH 216 cabinet suspension bracketCod articol 79717

For use on the back of the rear panel
For rail and hook suspension
Load capacity: 55 kg / each in accordance with EN 15939 in test frame A
Attached to the side panel with 3 side pins and screwed into rear panel groove
Suitable for use with rear panel recess of 16 mm and over
Fast, convenient height adjustment at sturdy adjustment screw and gear: ± 8 mm
Depth adjustment: 25 mm max.
Side adjustment: ± 3 mm for hook suspension, ± 7.5 mm for rail fixing
Adjustment screws are protected from becoming unscrewed accidentally
Lift off height: 7.5 mm
Hook suspension: the shape of the hook prevents the cabinet from slipping off
Suitable for use with B or H type suspension rails
Galvanised steel - fully recyclable
MUST ALWAYS be screwed into the cabinet body side.
Optional "lift off guard" function by means of special screw

Set comprises:

1 cabinet suspension bracket left
1 cabinet suspension bracket right
2 special screws for optional lift-off guard

Advice:

Please order SAH 216 cover caps separately
Set includes special screw for optional lift-off guard

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Asistenţă Tehnică

Deschideți catalogul răsfoibil (TECHNICĂ ȘI INOVAȚII)

Tabelă cuprins

Capacitate de încărcare kg

55 kg

Système anti-chute

sans sécurité anti-décrochage fără sistem de siguranță la ridicare cu siguranță anti ridicare integrată

Montaj pe partea

stânga și dreapta dreapta

Unitate de ambalare

25 set

Cod articol

79717

Adăugat la coșul tău de cumpărături

Detalii despre produs

Detalii tehnice

Retragere panou spate	16 mm min.
Capacitate de încărcare kg	55 kg
Montaj pe partea	stânga și dreapta
Protecție la demontare	fără sistem de siguranță la ridicare
Reglare integrată pe adâncime	25 mm max.
EAN	4023149866708
Cod articol	79717
Unitate de ambalare	25 ea.