- For screwing on
- For rail and hook suspension
- Guard to prevent slipping off sideways when suspended from a hook
- Load capacity 40 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
- 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
- Rear panel recess (to front edge of rear panel) at least 16 mm
- Lift off height 7.5 mm
- Suitable for use with B type, A type, L type suspension rails
- Steel nickel plated
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical Assistant
Открыть навигатор по каталогу (TECHNIQUES ET INNOVATION)Coté de ferrage
PU
Order no.
Добавлено в корзину покупок
Технические подробности
| Capacité de charge kg | 40 kg |
| Coté de ferrage | à gauche |
| Dimension de réglage de la profondeur (préréglage du crochet, dimensions paroi arrière du boîtier jusqu’à l’extrémité du crochet) | SAH 116,1 T21 |
| Réglage de la profondeur intégré | 15 mm |
| Retrait de paroi arrière | mini 16 mm |
| Matériau du boîtier | Acier zingué |
| EAN | 4023149651526 |
| Référence | 1019600 |
| UE | 100 pce |
Adresse du fabricant
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Allemagne
Contact : info@hettich.com
CAD Data
Installation instructions & Processing information
Safety precautions
|
Follow instructions |
|
Use eye protection |
|
Use hand protection |
|
Climbing prohibited |
|
No heavy load |
|
Warning against pointed and sharp objects |
|
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings. |
|
Warning of falling parts in the event of incorrect assembly, overloading or misuse. |
|
Not suitable for children under 3 years. Risk of swallowing due to small parts. |
|
Caution! Ensure a suitable choice of material. |
|
Caution! Use dowels and fasteners suitable for the wall material. |
|
Warning against incorrect assembly due to the use of incorrect tools. |
|
Attention! Only suitable for indoor use and the usual climatic conditions there |
|
Caution! Use adjusting devices with care. Risk of injury due to slipping. |
|
Attention adhesive bond! The adhesive bond can come loose if not processed properly |
|
|
Attention shipping packaging! Fittings may fall out if opened carelessly. |