- Ъглова панта Sensys W30
- С интегриран демпфер, с автоматика на затварянето (Sensys 8639i W30)
- Оценка на качеството по EN 15570, ниво 3
- Ъгъл на отваряне 95°
- За дебелина на вратата 15 - 28 мм
- Корпусна ситуация покрит кант (B 2 мм)
- TH-Схема на разпробиване 52 x 5,5 мм
- Дълбочина на главата 12,8 мм
- Монтаж за завинтване (TH 52)
- Интегрирано регулиране на припокриването на канта +2 мм мм / -2 мм
- Интегрирано регулиране по дълбочина +3 мм / -2 мм
- Регулиране по височина от монтажната пластина
- Стомана никелирано
Корпусна ситуация
Начин на монтаж
Схема за разпробиване
Основни
Опаковъчна единица
Кат. №
Aggiunto al carrello acquisti
Dettagli tecnici
| Struttura | Mobile ad angolo 120° (W30) |
| Tipo di anta |
Anta standard / anta in legno Anta con telaio in alluminio (larghezza profilo min. 50 mm) Anta con telaio in legno (larghezza profilo min. 50 mm) |
| Caratteristiche di comfort | con ammortizzatore incorporato |
| Tipo di battuta | in battuta |
| Angolo di apertura | 95 ° |
| Spessore anta min. | 15 mm |
| Spessore anta max. | 28 mm |
| Versione scodellino | TH 52 |
| Base | 2 mm |
| Diametro scodellino | 35 mm |
| Profondità scodellino | 12,8 mm |
| Tipo di montaggio | con fissaggio a viti |
| Finitura cerniera | Acciaio / zama nichelata |
| Schema di foratura | TH 52 x 5,5 mm |
| Foro per fissaggio | - |
| Diametro dei fori di fissaggio |
Centraggio Preforatura max. ø 2,5 mm |
| Regolazione incorporata del sormonto | +2 mm / -2 mm |
| Regolazione incorporata della profondità | +3 mm / -2 mm |
| Molla di tenuta | Sì |
| Finitura | nichelato |
| EAN | 4023149390654 |
| Codice precedente | 9085166 |
| Codice | 9088016 |
| Conf. | 50 pz. |
Indirizzo del produttore
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Germania
Contatti: info@hettich.com
Videos
Installation instructions & Processing information
- Adjusting hinge
- Installing hinge
- Hettich Technical Assistant
- Calculating weight / Number of hinges per door
- Installing the hinge cup
- Adjusting mounting plate (oblong hole height adjustment)
- Drilling pattern tolerances
- Adjusting mounting plate (Direct height adjustment)
- Mounting the opening angle stop
Catalogue Information
Safety instructions
|
|
Follow instructions |
|
|
Keep away from children |
|
|
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings. |
|
|
Attention shipping packaging! Fittings may fall out if opened carelessly. |
|
|
Attention! Only suitable for indoor use and the usual climatic conditions there |
|
|
Caution! Ensure a suitable choice of material. |
|
|
Warning against incorrect assembly due to the use of incorrect tools. |
|
|
Caution! Use adjusting devices with care. Risk of injury due to slipping. |



