SAH 216 cabinet suspension bracket | 79717 | eShop Hettich - Your leading manufacturer of furniture fittings

Ugrás a tartalomba Ugrás a navigációs menüre

SAH 216 cabinet suspension bracketRendelési szám 79717

For use on the back of the rear panel
For rail and hook suspension
Load capacity: 55 kg / each in accordance with EN 15939 in test frame A
Attached to the side panel with 3 side pins and screwed into rear panel groove
Suitable for use with rear panel recess of 16 mm and over
Fast, convenient height adjustment at sturdy adjustment screw and gear: ± 8 mm
Depth adjustment: 25 mm max.
Side adjustment: ± 3 mm for hook suspension, ± 7.5 mm for rail fixing
Adjustment screws are protected from becoming unscrewed accidentally
Lift off height: 7.5 mm
Hook suspension: the shape of the hook prevents the cabinet from slipping off
Suitable for use with B or H type suspension rails
Galvanised steel - fully recyclable
MUST ALWAYS be screwed into the cabinet body side.
Optional "lift off guard" function by means of special screw

Set comprises:

1 cabinet suspension bracket left
1 cabinet suspension bracket right
2 special screws for optional lift-off guard

Advice:

Please order SAH 216 cover caps separately
Set includes special screw for optional lift-off guard

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Technikai Asszisztens

Overview table

Capacité de charge kg

55 kg

Système anti-chute

sans sécurité anti-décrochage avec sécurité anti-décrochement intégrée

Coté de ferrage

à gauche et à droite à gauche à droite

25 kit

Référence

79717

Hozzáadva az Ön bevásárló kosarához

Détails des produits

Műszaki részletek

Retrait de paroi arrière	Mini 16 mm
Capacité de charge kg	55 kg
Coté de ferrage	à gauche et à droite
Système anti-chute	sans sécurité anti-décrochage
Réglage de la profondeur intégré	25 mm maxi
EAN	4023149866708
Référence	79717
UE	25 pce