SAH 130 for installation in cabinet body | 79724 | eShop Hettich - Your leading manufacturer of furniture fittings

Saltar ao conteúdo Saltar para o menu de navegação

SAH 130 for installation in cabinet bodyNúmero do artigo 79724

For pressing in
For rail and hook suspension
Guard to prevent slipping off sideways when suspended from a hook
Load capacity 35 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm
Lift off height 7.5 mm
Suitable for use with A type and B type suspension rails
Galvanised steel / white plastic

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Technical Assistant

Ir para o catálogo de folhear online (TÉCNICA E INOVAÇÕES)

Tabela geral

Coté de ferrage

à droite left and right left

Colour

white

25 Set

Order no.

79724

Adicionado ao seu carrinho de compras

Detalhes aranżacji do produto

Detalhes técnicos

Capacidade de carga kg	35 kg
Cor	branco
Lado de montagem	esquerda e direita
Medida de afinação em profundidade (afinação de fábrica do gancho, medido desde o painel traseiro da carcaça até à ponta do gancho)	19
Ajuste de profundidade integrado	máx. 15 mm
Material carcaça	Plástico branco
EAN	4023149797248
Código	79724
Emb.	25 unid.