|
|
300004668 |
Balama Intermat de 125° (Intermat 9944), aplicată, Unghi de deschidere 125°, TH-tipar de găurire52 x 5,5 mm, montare prin înșurubare (-)
|
aplicată |
montare prin înșurubare |
TH 52 x 5,5 mm |
50 ea. |
73905 |
|
|
300004672 |
Balama Intermat de 125° (Intermat 9944), aplicată, Unghi de deschidere 125°, TH-tipar de găurire52 x 5,5 mm, prin presare (ø 10 x 11)
|
aplicată |
prin presare |
TH 52 x 5,5 mm |
50 ea. |
73906 |
|
|
300004676 |
Charnière Intermat 125° (Intermat 9944), en applique, Angle d'ouverture 125°, TB-schéma de perçage 45 x 9,5 mm, à enfoncer (ø 8 x 11)
|
en applique |
à enfoncer |
TB 45 x 9,5 mm |
50 pce |
73907 |
|
|
300004740 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TH-drilling pattern 52 x 5.5 mm, for screwing on (-)
|
half overlay |
for screwing on |
TH 52 x 5,5 mm |
50 ea. |
73909 |
|
|
300004744 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TH-drilling pattern 52 x 5.5 mm, for pressing in (ø 10 x 11)
|
half overlay |
for pressing in |
TH 52 x 5,5 mm |
50 ea. |
73910 |
|
|
300004748 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TB-drilling pattern 45 x 9.5 mm, for pressing in (ø 8 x 11)
|
half overlay |
for pressing in |
TB 45 x 9,5 mm |
50 ea. |
73911 |
|
|
300004764 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TH-drilling pattern 52 x 5.5 mm, with expanding sockets (ø 10 x 11)
|
half overlay |
with expanding sockets |
TH 52 x 5,5 mm |
50 ea. |
9043371 |
|
|
300004768 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TB-drilling pattern 45 x 9.5 mm, for screwing on (-)
|
half overlay |
for screwing on |
TB 45 x 9,5 mm |
50 ea. |
9043380 |
|
|
300004772 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TB-drilling pattern 45 x 9.5 mm, with expanding sockets (ø 8 x 11)
|
half overlay |
with expanding sockets |
TB 45 x 9,5 mm |
50 ea. |
9043382 |
|
|
300004776 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TH-drilling pattern 52 x 5.5 mm, for screwing on (-)
|
half overlay |
for screwing on |
TH 52 x 5,5 mm |
200 ea. |
1058546 |
|
|
300004780 |
125° Intermat hinge (Intermat 9944), half overlay, Opening angle 125°, TB-drilling pattern 45 x 9.5 mm, for pressing in (ø 8 x 11)
|
half overlay |
for pressing in |
TB 45 x 9,5 mm |
200 ea. |
1058550 |
|
|
300004792 |
Intermat 125°-Scharnier (Intermat 9944), halb vorliegend, Öffnungswinkel 125°, TH-Bohrbild 52 x 5,5 mm, mit Spreizmuffen (ø 10 x 11)
|
halb vorliegend |
mit Spreizmuffen |
TH 52 x 5,5 mm |
200 St. |
9044967 |
