- With differential roller
- Approx. 33 mm over extension runner
- 40kgLoad capacity to EN 15338, Level 2
- Galvanised steel
Minimum front panel height for 32 mm hole line:
- Max. front panel height 5 HE (320 mm)
- Min. front panel height 2 HE (128 mm) for wide drawer and hanging file frame
- Min. front panel height 2.5 HE (160 mm) for SysTech drawer side profile
Minimum front panel height for 25 mm hole line:
- Max. front panel height 6 HE (300 mm)
- Min. front panel height 2.5 HE (125 mm) for wide drawer and hanging file frame
- Min. front panel height 3 HE (150 mm) for SysTech drawer side profile
Advice:
- Stop Control and Stop Control Plus locking bars must be ordered separately
- Not designed for Parallel system and Push to open
- Please order self closing housing with or without Silent System separately
- Fixing position: 37 - 256 mm
Hettich CAD
Hettich Technical Assistant
Artikelpagina (Bladerkatalogus TECHNIEK EN TOEPASSING)Constructiewijze
Min. inbouwdiepte achter fronten
Min. inbouwdiepte achter deuren
Aanslagzijde
VE
Bestelnr.
Toegevoegd aan uw winkelwagen
Technische gegevens
| Constructiewijze | voor eindeloze bouwwijze, maat X = 22 mm |
| Min. inbouwdiepte achter fronten | 316 mm |
| Min. inbouwdiepte achter deuren | 336 mm |
| Корпусна страница | ляв и десен |
| Товароносимост кг | 40 кг |
| Материал | Стомана |
| Покритие | поцинковано |
| Вид водач | Скрит водач |
| Вид изтегляне | Свръхизтегляне |
| Функции за комфорт | Съвместимост със Silent System |
| Мин. монтажна ширина | Размер X = 22 мм |
| Ред отвори |
25 мм 32 мм |
| Стъпка на растера |
25 мм 32 мм |
| Позиция за закрепване | 37 - 256 mm |
| Компоненти | Водачи |
| Област на приложение | Секционен шкаф, дълбочина 316 мм |
| EAN | 4023149952616 |
| Кат. № | 9209633 |
| Кол-во в упаковке | 1 шт. |
CAD Data
Installation instructions & Processing information
Safety instructions
|
Follow instructions |
|
Use hand protection |
|
Climbing prohibited |
|
No heavy load |
|
Caution! Use dowels and fasteners suitable for the wall material. |
|
Warning against incorrect assembly due to the use of incorrect tools. |