
- For pressing in
- For rail and hook suspension
- Guard to prevent slipping off sideways when suspended from a hook
- Load capacity 35 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
- 3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
- Rear panel recess (to front edge of rear panel) at least 16 mm
- Lift off height 7.5 mm
- Suitable for use with A type, B type and L typed suspension rails
- Galvanised steel / white plastic
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Корпусна страница
Опаковъчна единица
Кат. №
Added to Your Shopping Cart
Technical details
Load capacity kg | 35 kg |
Mounting side | left and right |
Depth adjustment distance in (hook's factory setting, measured from enclosure rear to end of hook) | 19 |
Integrated depth adjustment | 15 mm max. |
Rear panel recess | 16 mm min. |
Material, housing | Plastic, white |
EAN | 4023149797248 |
Order no. | 79724 |
PU | 25 ea. |
Manufacturer's address
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Germany
Contact: info@hettich.com
CAD Daten
Montage- & Verarbeitungsinformationen
Sicherheitshinweise
|
Anleitung beachten |
|
Augenschutz benutzen |
|
Handschutz benutzen |
|
Aufsteigen verboten |
|
keine schwere Last |
|
Warnung vor spitzem und scharfem Gegenstand |
|
Warnung vor Klemm- und Quetschkanten. Nicht in offene Türspalten oder Beschlagsöffnungen fassen. |
|
Warnung vor herabfallenden Teilen bei falscher Montage, Überbeanspruchung oder Fehlgebrauch. |
|
Nicht geeignet für Kinder unter 3 Jahren. Verschluckungsgefahr durch Kleinteile. |
|
Achtung! Auf eine geeignete Materialauswahl achten. |
|
Achtung! Für das Wandmaterial geeignete Dübel und Befestigungsmittel verwenden. |
|
Warnung vor Fehlmontage durch Verwendung von falschem Werkzeug. |
|
Achtung! Nur für den Innenraum und dort übliche klimatische Bedingungen geeignet |
|
Achtung! Einstellvorrichtungen vorsichtig verwenden. Verletzungsrisiko durch Abrutschen. |
|
Achtung Klebeverbindung! Bei unsachgemäßer Verarbeitung kann sich die Klebeverbindung lösen und Möbelteile herabfallen. |
|
Achtung Versandverpackungen! Beim unvorsichtigen Öffnen können Beschlagteile herausfallen. |