- For use on the back of the rear panel
- For rail and hook suspension
- Load capacity: 55 kg / each in accordance with EN 15939 in test frame A
- Attached to the side panel with 3 side pins and screwed into rear panel groove
- Suitable for use with rear panel recess of 16 mm and over
- Fast, convenient height adjustment at sturdy adjustment screw and gear: ± 8 mm
- Depth adjustment: 25 mm max.
- Side adjustment: ± 3 mm for hook suspension, ± 7.5 mm for rail fixing
- Adjustment screws are protected from becoming unscrewed accidentally
- Lift off height: 7.5 mm
- Hook suspension: the shape of the hook prevents the cabinet from slipping off
- Suitable for use with B or H type suspension rails
- Galvanised steel - fully recyclable
- MUST ALWAYS be screwed into the cabinet body side.
- Optional "lift off guard" function by means of special screw
Set comprises:
- 1 cabinet suspension bracket left
- 1 cabinet suspension bracket right
- 2 special screws for optional lift-off guard
Advice:
- Please order SAH 216 cover caps separately
- Set includes special screw for optional lift-off guard
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich technický asistent
Strana v katalogu TECHNIKA A INOVACE k prolistováníНагрузочная способность, кг
Защита от демонтажа
Cторона монтажа
Кол-во в упаковке
Артикул
Přidáno do nákupního košíku
Technické detaily
| Hátsó panel visszavágása | 16 mm min. |
| Teherbírás kg | 55 kg |
| Szerelési oldal | bal és jobb |
| Eltávolítás védelem | leemelés elleni védelem nélkül |
| Beépített mélységállítás | 25 mm max. |
| EAN | 4023149866708 |
| Rendelési szám | 79717 |
| Csomagolási egység | 25 ea. |
Gyártó címe
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Németország
Érintkezés: info@hettich.com
