SAH 130 for installation in cabinet body | 79724

Перейти к содержимому Перейти к меню навигации

SAH 130 for installation in cabinet bodyНомер товарной единицы 79724

For pressing in
For rail and hook suspension
Guard to prevent slipping off sideways when suspended from a hook
Load capacity 35 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm
Lift off height 7.5 mm
Suitable for use with A type, B type and L typed suspension rails
Galvanised steel / white plastic

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Asistenţă Tehnică

Открыть навигатор по каталогу (TECHNICĂ ȘI INOVAȚII)

Oбзорная таблица

Coté de ferrage

à gauche left and right dreapta

25 Set

Order no.

79724

Добавлено в корзину покупок

Описание продукта

Технические подробности

Нагрузочная способность, кг	35 кг
Cторона монтажа	левая и правая
Регулировка глубины в (подвес предварительно отрегулирован в нулевое положение)	19
Встроенная регулировка по глубине	Макс. 15 мм
Смещение задней стенки	мин. 16 мм
Материал, корпуса	Пластик, цвет белый
EAN	4023149797248
Артикул	79724
Кол-во в упаковке	25 шт.