- With differential roller
- Approx. 33 mm over extension runner
- 40kgLoad capacity to EN 15338, Level 2
- Galvanised steel
Minimum front panel height for 32 mm hole line:
- Max. front panel height 5 HE (320 mm)
- Min. front panel height 2 HE (128 mm) for wide drawer and hanging file frame
- Min. front panel height 2.5 HE (160 mm) for SysTech drawer side profile
Minimum front panel height for 25 mm hole line:
- Max. front panel height 6 HE (300 mm)
- Min. front panel height 2.5 HE (125 mm) for wide drawer and hanging file frame
- Min. front panel height 3 HE (150 mm) for SysTech drawer side profile
Advice:
- Stop Control and Stop Control Plus locking bars must be ordered separately
- Not designed for Parallel system and Push to open
- Please order self closing housing with or without Silent System separately
- Fixing position: 37 - 256 mm
Hettich CAD
Hettich Technical AssistantВариант
Мин. монтажная глубина в за передними панелями
Мин. монтажная глубина в за дверцами
Cторона монтажа
Кол-во в упаковке
Артикул
Se ha añadido a su cesta de compra
Datos técnicos
| Tipo de construcción | para construcción en continuo, medida X = 22 mm |
| Profundidad de montaje mín. detrás de paneles | 316 mm |
| Profundidad de montaje mín. detrás de puertas | 336 mm |
| Lado de montaje | Izquierda + Derecha |
| Capacidad de carga kg | 40 kg |
| Material | Acero |
| Acabado | Cincado |
| Tipo de corredera | Guía oculta |
| Tipo de extracción | Sobreextracción |
| Propiedades de confort | Compatible con Silent System |
| Ancho de montaje mín. | medida X = 22 mm |
| Hilera de taladros |
25 mm 32 mm |
| Distancia modular |
25 mm 32 mm |
| Posición de fijación | 37 - 256 mm |
| Componentes | Correderas |
| Campo de aplicación | Tabique de armario, profundidad 316 mm |
| EAN | 4023149952616 |
| Código | 9209633 |
| U.E. | 1 uds. |
Catalogue Information
Safety precautions
|
Follow instructions |
|
Use hand protection |
|
Climbing prohibited |
|
No heavy load |
|
Caution! Use dowels and fasteners suitable for the wall material. |
|
Warning against incorrect assembly due to the use of incorrect tools. |