Cabinet suspension bracket SAH 215 with lift off guard | 9277719 | eShop Hettich - Your leading manufacturer of furniture fittings

Sari la conținut Treceți la meniul de navigare

Cabinet suspension bracket SAH 215 with lift off guardCod articol 9277719

For use on the back of the rear panel
Integrated lift off guard prevents the wall unit from accidentally falling off the wall
For rail fixing only
Load capacity: 45 kg / each in accordance with EN 15939 in test frame A
Attached to side panel with 3 side pins
and screwed down in the rear panel groove
Suitable for use with rear panel recess of 16 mm and over
Fast, easy height adjustment by means of sturdy
adjustment screw and gear: ± 8 mm
Depth adjustment: 25 mm max.
Side adjustment: ± 7.5 mm for rail fixing
Adjustment screws are protected from becoming unscrewed accidentally
Lift off height: 7.5 mm
Suitable for use with B, H or M type suspension rail
Galvanised steel - fully recyclable
MUST ALWAYS be screwed into the cabinet body side.

Advice:

Please order SAH 215 cover caps separately

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD