- Vidalama için
- Çıtalı ve kancalı montaj için
- Kancalı montajda, yana kaymaya karşı emniyet altına alınmıştır
- Yükleme kapasitesi 30 kg / adet, EN 15939 uyarınca test modülü A içinde (gövde başına bir çift SAH; örn. bitiş rafı gibi ilavelerin kendi askıları olmadan yapılmasına izin verilmez)
- 3 boyutlu hizalama: Yükseklik -2/+9 mm / derinlik -2/+18 mm / kancalı montajda yanlarda ± 6 mm / raylı montajda yanlarda ± 7 mm
- Arka pano çıkıntısı (arka panonun ön kenarına kadar) min. 15 mm
- Kaldırarak çıkarma yüksekliği 6 mm
- Tip A, Tip B, Tip L askı rayı ile birlikte kullanılabilir
- Galvanizli çelik / beyaz plastik
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5,5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5,5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical Assistant
Открыть навигатор по каталогу (ТЕХНОЛОГИИ И ИННОВАЦИИ)PU
Order no.
Добавлено в корзину покупок
Технические подробности
| Depth adjustment distance in (hook's factory setting, measured from enclosure rear to end of hook) | SAH 15 T16* |
| EAN | 4023149001208 |
| Order no. | 9208645 |
| PU | 25 ea. |