Saltar ao conteúdo Saltar para o menu de navegação
  • Надвижной монтаж с фиксаторами и регулировкой по высоте без инструмента
  • Встроенный демпфер
  • Подходит для ящика с толщиной боковины до 16 мм
  • Концепция единой платформы: идентичные размеры корпуса, ящика и передней панели для направляющих Quadro полного и частичного выдвижения надвижного монтажа
  • Нагрузочная способность соответствует стандарту EN 15338, уровень 3
  • Сталь оцинкованная

Рекомендации:
  • При использовании держателя для фиксации полки в выдвинутом положении длину ящика необходимо уменьшить на 12 мм. (NL) (NL - 12 мм)
Класс нагрузки
25 kg
Névleges hosszúság
550 mm 500 мм 500 mm 450 mm 400 mm 350 mm 300 mm 250 мм 250 mm
Cторона монтажа
левая и правая
Кол-во в упаковке
1 комплект
Артикул
9135941
Detalhes técnicos
Comprimento de gaveta SKL 500 mm
Capacidade de carga kg 25 kg
Distância entre furos b1 288 mm
Comprimento nominal em 500 mm
Lado de montagem esquerda e direita
Tipo de guia Corrediça oculta
Tipo de extração Corrediça de extracção parcial
Características de conforto Silent System
Profundidade mínima do corpo KT 513 mm
Tipo de montagem Montagem por deslizamento
Largura de montagem (espessura do perfil da gaveta) EB 20 (espessura do perfil da gaveta ≤ 16 mm)
Componentes Corrediças de extração
Cor prata
EAN 4023149487750
Código 9135941
Emb. 1 unid.
Endereço do fabricante

Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Alemanha

Contacto: info@hettich.com

Safety precautions
Follow instructions
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings.
Warning against pointed and sharp objects
Not suitable for children under 3 years. Risk of swallowing due to small parts.
Attention shipping packaging! Fittings may fall out if opened carelessly.
Caution! Ensure a suitable choice of material.
Warning against incorrect assembly due to the use of incorrect tools.
Attention! Only suitable for indoor use and the usual climatic conditions there

A carregar... Por favor aguarde...