- Arka panonun arkasında kullanım için
- Çıtalı ve kancalı montaj için
- Yükleme kapasitesi 55 kg / adet, EN 15939 uyarınca test modülü A içinde (gövde başına bir çift SAH; örn. bitiş rafı gibi kendi askısı olmayan ilavelere izin verilmez)
- Sabitleme, yan pano içinde 3 yanal pim ile
ve arka pano oluğuna vidalanarak - 16 mm'lik arka pano çıkıntısından itibaren kullanılabilir
- Sağlam ayar cıvatası ve aktarma dişli kutusu
üzerinden hızlı ve konforlu yükseklik ayarı: ± 8 mm - Derinlik ayarı: maks. 25 mm
- Yan kaydırma: kancalı montajda ± 3 mm
- Ayar cıvataları, istem dışı gevşemeye karşı emniyet altına alınmıştır
- Kaldırarak çıkarma yüksekliği: 7,5 mm
- Kancalı montaj: kancanın kapalı geometrisi,
dolabın kayarak düşmesini önler - B, H veya M tipi askı rayı ile birlikte kullanılabilir
- Galvanizli çelik, tam geri dönüştürülebilir
- Gövdenin yan tarafında vidalanması ZORUNLUDUR.
- "Dışarı çıkma emniyeti", opsiyonel olarak özel cıvata ile mümkündür
Bilgiler:
- Kapak keplerini SAH 216 lütfen ayrı sipariş edin
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5,5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5,5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical Assistant
Page d'article (Catalogue à feuilleter Teknoloji ve Uygulama)2,82 € / Adet
Taşıma kapasitesi kg
Düşme emniyeti
Montaj yönü
PŞ
Sipariş No.
Ajouté à votre panier
Détails techniques
| Capacidade de carga kg | 55 kg |
| Lado de montagem | direito |
| Proteção contra quedas | sem segurança contra desmontagem acidental |
| Ajuste de profundidade integrado | máx. 25 mm |
| EAN | 4023149365744 |
| Código | 1069642 |
| Emb. | 100 unid. |
CAD Data
Installation instructions & Processing information
Safety instructions
|
Follow instructions |
|
Use eye protection |
|
Use hand protection |
|
Climbing prohibited |
|
No heavy load |
|
Warning against pointed and sharp objects |
|
Warning of pinching and crushing edges. Do not reach into open door gaps or fitting openings. |
|
Warning of falling parts in the event of incorrect assembly, overloading or misuse. |
|
Not suitable for children under 3 years. Risk of swallowing due to small parts. |
|
Caution! Ensure a suitable choice of material. |
|
Caution! Use dowels and fasteners suitable for the wall material. |
|
Warning against incorrect assembly due to the use of incorrect tools. |
|
Attention! Only suitable for indoor use and the usual climatic conditions there |
|
Caution! Use adjusting devices with care. Risk of injury due to slipping. |
|
Attention adhesive bond! The adhesive bond can come loose if not processed properly |
|
|
Attention shipping packaging! Fittings may fall out if opened carelessly. |