Dolap askı elemanı SAH 130, T=19, sağ, Beyaz | 1066279 | eShop Hettich

Перейти к содержимому Перейти к меню навигации

Dolap askı elemanı SAH 130, T=19, sağ, BeyazНомер товарной единицы 1066279

Presleyerek sabitleme için
Çıtalı ve kancalı montaj için
Kancalı montajda, yana kaymaya karşı emniyet altına alınmıştır
Yükleme kapasitesi 35 kg / adet, EN 15939 uyarınca test modülü A içinde (gövde başına bir çift SAH; örn. bitiş rafı gibi ilavelerin kendi askıları olmadan yapılmasına izin verilmez)
3 boyutlu terazileme: Yükseklik ± 7 mm / derinlik maks. 15 mm / kancalı montajda yanlarda ± 3 mm / raylı montajda yanlarda ± 7 mm
Arka pano çıkıntısı (arka panonun ön kenarına kadar) min. 16 mm
Kaldırarak çıkarma yüksekliği 7,5 mm
Galvanizli çelik / beyaz plastik

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5,5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5,5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Technical Assistant

Открыть навигатор по каталогу (ТЕХНОЛОГИИ И ИННОВАЦИИ)

1.20 € / Adet

Oбзорная таблица

Cторона монтажа

левый белая

Кол-во в упаковке

100 шт.

Артикул

1066279

Добавлено в корзину покупок

Описание продукта

Технические подробности

Нагрузочная способность, кг	35 кг
Цвет	белая
Cторона монтажа	правый
Регулировка глубины в (подвес предварительно отрегулирован в нулевое положение)	19
Встроенная регулировка по глубине	Макс. 15 мм
EAN	4023149364716
Артикул	1066279
Кол-во в упаковке	100 шт.