Cabinet suspension bracket SAH 116, right | 1019599 | eShop Hettich - Your leading manufacturer of furniture fittings

Sari la conținut Treceți la meniul de navigare

Cabinet suspension bracket SAH 116, rightCod articol 1019599

For screwing on
For rail and hook suspension
Guard to prevent slipping off sideways when suspended from a hook
Load capacity 40 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm
Lift off height 7.5 mm
Suitable for use with B type, A type, L type suspension rails
Steel nickel plated

Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:

Both the furniture design and the quality of the furniture's material and production are beyond our control.
The quality and condition of wall materials are also beyond our control.
The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H).
Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.

Hettich CAD

Hettich Asistenţă Tehnică

Deschideți catalogul răsfoibil (TECHNICĂ ȘI INOVAȚII)

Tabelă cuprins

Montaj pe partea

stânga și dreapta stânga right left dreapta

100 ea.

Order no.

1019599

Adăugat la coșul tău de cumpărături

Detalii despre produs

Detalii tehnice

Capacitate de încărcare kg	40 kg
Montaj pe partea	dreapta
Distanța de reglare a adâncimii în (setarea din fabrică a cârligului, măsurată de la spatele corpului până la capătul cârligului)	SAH 116,1 T21
Reglare integrată pe adâncime	15 mm
Adâncimea panoului din spate	16 mm min.
Material carcasă	Oțel galvanizat
EAN	4023149651533
Cod articol	1019599
Unitate de ambalare	100 ea.