
- For strong, positive fitting and friction locked connections between shelves and side panels, high load capacity.
- The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with 30 and 10 mm ø
- The shelf can be inserted from above or from the front
- The eccentric can also be tightened in the bottom panel from above. A through hole is required in the bottom panel for this purpose.
- For special applications, a plinth adjustment element can also be adjusted through the fitting
- Nickel plated die-cast zinc
- Can be used in System 32
Panel thickness
Article version
Finish / colour
PU
Order no.
Adicionado ao seu carrinho de compras
Detalhes técnicos
Espessura do painel | 19 mm |
Diâmetro de perfuração 01 | 30 mm |
Diâmetro de perfuração 02 | 10 mm |
Versão do artigo | sem gola |
Superfície / Cor | niquelado |
EAN | 4023149474545 |
Código | 47454 |
Emb. | 200 unid. |
Endereço do fabricante
Hettich Marketing- und Vertriebs GmbH & Co. KG
Anton-Hettich-Straße 12-16
32278 Kirchlengern
Alemanha
Contacto: info@hettich.com
Caractéristiques CAD
Consignes de sécurité
|
Respecter les instructions |
|
pas de charge lourde |
|
Avertissement : objet pointu et tranchant |
|
Avertissement : pièces risquant de tomber en cas de montage inapproprié, d’utilisation excessive ou de mauvaise utilisation. |
|
Ne convient pas aux enfants de moins de 3 ans. Risque d'ingestion dû aux petites pièces. |
|
Attention ! Veiller à choisir un matériau approprié. |
|
Attention ! Utiliser des chevilles et des moyens de fixation adaptés au matériau du mur. |
|
Avertissement concernant les erreurs de montage dues à l'utilisation d'un outil inapproprié. |
|
Attention ! Convient uniquement à l'intérieur et aux conditions climatiques habituelles. |