- Vidalama için
- Kızaklı veya kancalı montaj
- Kancalı montajda, yana kaymaya karşı emniyet altına alınmıştır
- Yükleme kapasitesi 40 kg / adet, EN 15939 uyarınca test modülü A içinde (gövde başına bir çift SAH; örn. bitiş rafı gibi ilavelerin kendi askıları olmadan yapılmasına izin verilmez)
- 3 boyutlu terazileme: Yükseklik ± 7 mm / derinlik maks. 15 mm / kancalı montajda yanlarda ± 3 mm / raylı montajda yanlarda ± 7 mm
- Arka pano çıkıntısı (arka panonun ön kenarına kadar) min. 16 mm
- Kaldırarak çıkarma yüksekliği 7,5 mm
- Tip A, Tip B, Tip L askı rayı ile birlikte kullanılabilir
- Nikelajlı çelik
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5,5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5,5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Hettich Technical Assistant4.01 € / Set
Montaj yönü
PŞ
Sipariş No.
Added to Your Shopping Cart
Technical details
| Capacidade de carga kg | 40 kg |
| Lado de montagem | esquerda e direita |
| Medida de afinação em profundidade (afinação de fábrica do gancho, medido desde o painel traseiro da carcaça até à ponta do gancho) | SAH 116,1 T21 |
| Ajuste de profundidade integrado | 15 mm |
| Cobrimento do painel traseiro | 16 mm min. |
| Material carcaça | Aço galvanizado |
| EAN | 4023149194764 |
| Código | 19476 |
| Emb. | 25 unid. |
