Важно известие: Моля, имайте предвид, че нашият електронен магазин ще бъде достъпен само в ограничена степен поради дейности, свързани с поддръжката на сайта. Извиняваме се за причиненото неудобство и Ви благодарим за разбирането. Период: Sat, 8 Nov 2025, 7:00 AM (UTC+01:00, CET) – Sun, 9 Nov 2025, 7:00 PM (UTC+01:00, CET)
Извършват се дейности по поддръжката, услугите ни са ограничени. Опитайте отново по-късно. Благодарим Ви
- For drilling into ø 35 x 12.5 mm drilling
- Rear panel at least 16 mm thick
- Load capacity 15 kg each in accordance with EN 15939 in test rack A (one pair of SAH per cabinet body; elements without own suspension, such as end shelves, are not permitted)
- Side adjustment ± 4 mm
- Height adjustment ± 4 mm
- Suspension with suspension hook ø 6 x 50 mm
- Plastic / galvanised steel
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories:
- Both the furniture design and the quality of the furniture's material and production are beyond our control.
- The quality and condition of wall materials are also beyond our control.
- The suspension hooks we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
- Commercial type special mounting elements must be used for attachment to other wall materials.
- Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
- Mounting suspension rails:
- with 2 special screws ø 5.5 x 50 mm near each cabinet suspension bracket
- from a cabinet body width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each cabinet body (type A, type B and type H). - Add on elements, such as end shelves, must not be fitted without separate cabinet suspension bracket.
- The cabinet maker / dealer is responsible for ensuring that the furniture which is placed on the market meets with the requirements of EN 14749.
Hettich CAD
Страница от каталог (Разлистващ се каталог ТЕХНИКА И ИНОВАЦИИ)Цвят
Опаковъчна единица
Кат. №
Поставено в кошницата Ви
Технически детайли
| Load capacity kg | 15 kg |
| Colour | white |
| EAN | 4023149354663 |
| Order no. | 1000791 |
| PU | 500 ea. |